GD&T Training Worldwide

Providing GD&T training in English, Spanish, Portuguese and Mandarin.

Home of The GD&T Hierarchy

GD&T courses that are designed to keep the participant interested and engaged, while having fun.

On-Site and Computer Based Training
Public Seminars and Webinars

ASME Y14.5M-1994 to -2009 Update Coach

Back to Computer Based Training

This course is intended for those who already know GD&T in accordance with the ASME Y14.5M-1994 standard. This is not for someone who is new to GD&T.

The major revisions of the Standard are driven by the needs of industry. A drawing today is defined in the Y14.100 standard as "an engineering document or digital data file(s)." Designs and individual parts are more complex today. In addition, the need for higher quality and improved productivity demand that we get it right the first time. The applications of the new concepts will be shown on a variety of parts.

Upon completion, Tec-Ease will issue it's standard Certificate of Completion for The GD&T 2009 Update.

 

man at computer working on GD&T Training

ASME Y14.5-2009 Update CBT

ASME Y14.5M-1994 to -2009 Update Coach

This course should take 8 hours to complete.

Section 1 - Scope, Definitions, and General Dimensioning

  • Clarify Boundaries
  • The Coordinate System - New Symbol
  • Degrees of Freedom
  • Datum Feature Simulator Definition
  • Actual Envelopes
  • Irregular Features of Size - New Concept
  • Major Revisions to Fundamental Rules
  • Rounded Ends and Slotted Holes
  • Readability
  • Spotface - New Symbol
  • Section 2 - General Tolerancing

  • Positional Tolerancing Method
  • Basic Dimensions
  • Principle of Independency - New Symbol
  • Continuous Feature - New Symbol
  • Section 3 - Symbology

  • New Symbology Symbol Placement
  • Section 4 - Datum Reference Frames

  • Labeling the Coordinate System - New Symbol
  • Degrees of Freedom - New Symbols
  • Datum Feature Simulators
  • Degrees of Freedom Chart - Expansion of Datum Features
  • Virtual Condition - Clarified
  • Orienting Datum Planes - Clarified
  • Regardless of Material Boundary Application
  • Maximum Material Boundary Application
  • Datum Translation - New Symbol
  • Irregular Features of Size as Datum Features
  • Datum Feature Selection
  • Customized Datum Reference Frame - New Symbol
  • Mathematically Defined Surface
  • Clarifying Applicable Boundaries
  • Movable Datum Targets - New Symbol
  • Restraint Clarified
  • Multiple Datum Features
  • Simultaneous Requirements
  • Section 5 - Tolerances of Form

  • Application of Flatness RFS, MMC or LMC - New Use of Flatness
  • Section 6 - Tolerances of Orientation

  • One Orientation Symbol Instead of Three!
  • Section 7 - Tolerances of Location

  • Position, Concentricity and Symmetry
  • Profile of a Surface Control
  • LMC and LMB Applications to Position
  • Composite Position Tolerancing - Expanded
  • Position Tolerance with No Datum Reference
  • Section 8 - Tolerances of Profile

  • Profile Tolerances for Plane Surfaces
  • Offset Surfaces
  • Combined Controls
  • Unilateral and Unequally Disposed Profile - New Symbol
  • Profile Tolerances as General Requirements
  • All Over Specification/Symbol - New Symbol
  • Non-Uniform Zone - New Control
  • Non-Uniform Zone to Smooth the Transitions
  • Composite Profile Tolerancing - Expanded
  • Section 9 - Tolerances of Runout

  • No changes